TAPP 2 Independent Water Lab Test Barcelona
TAPP 2 Independent water lab test Barcelona
TAPP 2 removes over 80+ contaminants
At TAPP Water we believe in radical transparency and rigorous testing of the effectiveness of our products wherever they are used by customers. Therefore we continuously test the products to ensure that they live up to our promises and share the results openly.
First of all the filters go through lab tests where contaminants are artificially added, filtered and output is analysed to confirm effectiveness. Secondly we take water samples from customers before and after filtering.
Barcelona water lab test
Below is the lab test carried out by Itabe lab in Barcelona, Spain using a water sample of 2L of TAPP 2 filtered water, as well as 2L of non-filtered tap water. The test shows that TAPP 2 effectively reduces chemicals such as chloride, nitrate, microplastics, fluoride and THMs while keeping healthy minerals like Calcium, Potassium and Magnesium.
|Units||Maximum Recommended Value||Reduction|
Note: Chlorine is separately tested as it evaporates during transportation of the samples. To verify a simply home test strip set shows 95% effectiveness.
|Units||Maximum Recommended Value||Testing Methodology|
|pH||7.7||7.83||pH||≥ 6.5 y ≤ 9.5||Electrometry|
|Conductivity (25 ºC)||1||1.378||mS/cm||2.5||Electrometry|
|Total hardness||368.94||386||mg/l CaCO3||–||Calculation|
|Chlorides (Cl−)||212.2||38.4||mg/l||250||Ion chromatography|
|Nitrates (NO3)||7.1||1.3||mg/l||50||Ion chromatography|
|Fluoride (F)||0.15||<0.05||mg/l||–||Ion chromatography|
|Total trihalomethanes (TTHMs)||69.41||<5||μg/l||100||HRGC-MS|
|TCE + PCE||<10||<10||μg/l||10||HRGC-MS|
Lab name: itabe
Lab address: Castelao 96, ent. 2a. L’Hospitalet del Ll. (Barcelona)
Date of collection: 22/01/2018
Date of results: 31/01/2018
* Total Chlorine is tested separately with strips and a chlorine meter since the chlorine evaporates on the way to the lab.
** Microplastics count is based on Orb Media’s 2017 report concluding that 94% of US Tap Water contains microplastics or anthropogenic (man-made substances). We’ve used the average amount of particles found per gallon. The smallest particles were found to be 2.7 micron but most considerably larger. Therefore our testing has concluded that all microplastics particles found according to this test will be filtered by TAPP 2. 0 particles remain after filtering. The majority of the particles were fibers (98.3%) between 0.1–5 mm in length. The range in Europe was 0 to 13 particles/liter, with an overall mean of 3.8 particles/l. The report also found that bottled water contained even more microplastics. For more information see Original Orb Media Report and peer reviewed analysis of the study in Plos One.
Source: Independent Water Lab Test Barcelona